Tiny Tiny House

For a little while I’ve wanted to turn one of my house designs into a model that could serve as inspiration for someone aspiring to live tiny. Well a few weeks ago I submitted my design to a 3D printing service and today I got my first model in the mail! Check it out, it’s pretty cool!






You can’t see it in this picture, but when you look inside you can see both the sleeping loft and storage lofts inside.


It’s 5-1/2” long.


Even the trailer is detailed underneath.



If you want one for yourself you can find them at Shapeways. They ended up costing a lot more than I had expected, so they aren’t for everyone. But it does look really cool on my desk :)

Tinier Living Pictures

Here are some pictures of the Tinier Living House I took while I was down in Florida


The front door (on the back of the trailer). The soffit still isn’t done under the overhang, but that is the last exterior item I have to do.

Loft Window

This is the front of the trailer. The loft window is opened up to let some air in.

Sleeping Loft

This is the view as you come up the ladder. Lots of light. When we were working up there  I would open up the windows and a little breeze would come through.  It would just make me smile. If only I had a nice cold beer in my hand instead of a hammer.

Storage Loft

There is a small storage loft above the front door.

Front Door from within

Bathroom door

The cabinets and closets aren’t in yet, so not much to see here.

Tiny House Workshop

Our little tiny house factory :)

All Roughed In

I’ve completed the electrical and plumbing ‘rough in’ as well as another hour of video.

Electrical and plumbing roughed in

Next is the insulation. I’ve decided to do the insulation myself on this house due to the expense of the closed cell spray foam. The insulation companies often have a minimum charge to make it worth it for them to bring out and set up the foam truck. So even though this house is really small the cost of having it sprayed is the same as a much larger house. One quote I got was for $1200 while I expect I can do it myself (using the preformed sheets) for closer to $400.

After the insulation I will start on the interior siding, which will start to make it look more like a house on the inside.

On to the Interior

I finally finished the roof last week as well as three more videos!

Tiny House metal roof

So I celebrated with a beer (or two, or…). I have a way of finding reasons to celebrate the smallest of achievements :)

Celebrating the completion of the roof

I personally like the look of the metal roof, but I know it’s not for everyone. The problem is that there aren’t many alternatives that are as strong (for the high winds that are experienced while moving a house) and as lightweight as metal. The last time I was at my roofing supplier they had a brochure for a shake style metal roof that I thought looked pretty great. It has all the great qualities of a metal roof while also having a more natural appearance. I think I might use it on a house real soon. Below is a random image I found online so that you know what I’m talking about.

Weathered Wood Metal Roof


As I’ve said before, I still have a few miscellaneous items to finish on the exterior, but I think I am going to come back to those later and do some work on the interior now.

I picked up the remainder of the supplies I need to finish the interior. I do most of my shopping at Home Depot because I have found them to be cheaper overall than Lowes (which is actually closer to me). Lately though I have seen that Lowes is offering 5% off when you get one of their “membership rewards” card (like the cards at grocery stores). So when I was at Home Depot I asked the (really helpful) guy at the pro desk if they had something equivalent and low and behold they match the discount when asked. Pretty sweet! It’s like free money (that unfortunately you have to ask for). But now you know :)

So Close

Tiny House Exterior Siding Completed

The roof is almost done with just the ridge cap remaining. I was hoping to get that done today since I won’t work on the house again until next week but it didn’t happen.


Once the ridge cap is done I can stop covering the house with a tarp which is pretty exciting. I will still have a few odds and ends to do on the exterior (storage doors, wood under the overhang, etc.), but that will be the last of the truly labor intensive work. I’m not saying the interior doesn’t take effort and time, it’s just in a whole different category than framing, siding, and roofing.

Another Tinier Living Update

As promised here is a quick video update…

In the video I accidentally say that the house is 16′ long, it’s really 12′

Exterior siding is going up

I was finally able to work on the house last week. I put in a full weeks work and will do the same this coming week, weather permitting. The siding is going up and I am starting to see what it’s going to look like. I hope to have all of the exterior siding done as well as the roof by the end of the week, but I’m thinking that might be just a bit much, especially since we have rain predicted. I have a tendency to set lofty goals which often leads to disappointment, but when I aim low it’s easy not to overshoot.

Exterior Siding Being Installed

Here is my homemade tool (wood platform on an extendable paint pole) for installing siding by myself. It’s not very sophisticated but works like a charm. When you’re by yourself you sometimes have to get creative :)

Custom Siding Installation Tool

As I have said before I’ve been recording this entire build so I’m going a lot slower than I would like. But I think I’ve got between 4 to 6 weeks left. Then I’ll put out an updated version of the plans and list the house for sale.

I’ll have an update at the end of the week with a lot more pictures and maybe even a video.